Centrifugal Type Gas Blowers

Single Stage Blowers:

Single Stage blowers are gas-tight blowers, constructed with spark proof aluminium alloy casing and impellers, using a super glue and halves sealed, shaft with double lip seals so not required lubrication.  On the basis of construction supplied in two forms:

(a) Side Channel Blowers :-

The side channel Blower increases the pressure of the aspirated gas by the creation, in the peripheral toroidal channel, of a series of vortexes caused by centrifugal thrust of the impeller. During motion gas is recompressed repeatedly with a linear pressure increase.

(b)Turbotron Blowers :-

Machines with a revolutionary impeller, designed to extract or compressed combustible gases, such as bio-logical and natural gas, manufactured with their own shaft and bearings, designed for a wide range of operating speed.
We can offer machines with gas recirculation (by-pass), machines equipped with gas cooler, machines controlled via frequency inverter.

Multistage Blowers:

The gas is sucked into the first stage through an inlet volute, every next single stage is linked to the former one through a return channel, and a discharge volute collects the gas from the exit of the last stage delivering it to the outlet pipe. A typical “flow rate-pressure” curve is much more flat.